Absolute ™ Fillercote ™ is essentially an acrylic based primer with excellent filling and covering properties. It is in essence a first coat before an acrylic based top coat e.g Absolute ©Cashmere , Absolute © Super Acrylic PVA, etc.
Fill in all imperfections with relevant Absolute Paints ® filler
Stir with a FLAT SIDED PADDLE
Thinning is not necessary as the Absolute Paints products come optimised ready for use. In the event that thinning is deemed a necessity it shall not be more than 10% by volume. Thin with Water!
Number of coats : 2 coats
Preparing the surfaces : Make sure the surface is clean (no dirt or grease) and dry.
Dry Time : 2hrs
Painting : Apply 2 coats evenly either with brush, roller or spray. Leave 2 hours to dry between coats. When fully dry apply an appropriate Absolute paint system.
Cleaning : Remove paint from the brush with a cloth and then wash with water.
Storing : Store paint in dry conditions and protect from extreme temperatures.
Recycling : Don’t waste unwanted paint! Leftover product may be donated to someone or a cause
For More Detailed Instructions Please Follow Label Instructions On Your Paint Tin
Appearance : Matt White
Solids : Approx. 76 % by mass; 43 % by volume
Recommended DFT : 25 µm Max.: 35 µm
Theoratical Coverage : 7 – 11 m²/l at 30 µm DFT
Viscosity : 65 – 75 KU (typical)
SG : 1,25 – 1.35 kg/l
Flash Point : Min. 37 °C