Absolute ™ Pinkwood Primer is a general purpose deeply penetrating priming oil for wood, both internally and externally. Dries tack free and is non-swelling regarding water.

Fill in all imperfections with relevant Absolute Paints ® filler

Stir with a FLAT SIDED PADDLE

Thinning is not necessary as the Absolute Paints products come optimised ready for use. In the event that thinning is deemed a necessity it shall not be more than 10% by volume. Thin with White Spirits!

Number of coats : 2 coats

Preparing the surfaces : Make sure the surface is clean (no dirt or grease) and dry.

Drying Time

 

Dry Time : 2hrs

 

Painting : Apply 2 coats evenly either with brush, roller or spray. Leave 2 hours to dry between coats. When fully dry apply an appropriate Absolute paint system.

Cleaning : Remove paint from the brush with a cloth and then wash with Mineral Turpentine and water.

Storing : Store paint in dry conditions and protect from extreme temperatures.

Recycling : Don’t waste unwanted paint! Leftover product may be donated to someone or a cause

For More Detailed Instructions Please Follow Label Instructions On Your Paint Tin

Appearance    : Pink

Solids              : Approx.  64 % by mass;  43 % by volume

Recommended DFT     :   25 µm     Max.:   40 µm

Theoratical Coverage   : 12  m²/l at 30 µm DFT

Viscosity                        : 75   – 80  KU  (typical)

SG                                   : 1,31 kg/l

Flash Point                     : Min. 37 °C

Absolute Pinkwood Primer PDF
Download