Absolute ™ Universal Undercoat White is a combined high opacity primer and undercoat for use with latex and acrylic based paints. Based on an anti corrosive pigment and high quality alkyd resin, it provide the ideal protection.

Fill in all imperfections with relevant Absolute Paints ® filler


Thinning is not necessary as the Absolute Paints products come optimised ready for use. In the event that thinning is deemed a necessity it shall not be more than 10% by volume. Thin with White Spirits!

Number of coats : 2 coats

Preparing the surfaces : Make sure the surface is clean (no dirt or grease) and dry.

Drying Time


Dry Time : 2hrs


Painting : Apply 2 coats evenly either with brush, roller or spray. Leave 2 hours to dry between coats. When fully dry apply an appropriate Absolute paint system.

Cleaning : Remove paint from the brush with a cloth and then wash with Mineral Turpentine and water.

Storing : Store paint in dry conditions and protect from extreme temperatures.

Recycling : Don’t waste unwanted paint! Leftover product may be donated to someone or a cause

For More Detailed Instructions Please Follow Label Instructions On Your Paint Tin

Appearance    : Matt White

Solids              : Approx.  64 % by mass;  43 % by volume

Recommended DFT     :   25 µm     Max.:   40 µm

Theoratical Coverage   : 8 – 12  m²/l at 30 µm DFT

Viscosity                        : 75   – 80  KU  (typical)

SG                                   : 1,2 – 1.3 kg/l

Flash Point                     : Min. 37 °C

Absolute ™ Universal Undercoat MSDS